• 7 rue de Wintrange, L-5692 Elvange

  • +352 621 400 574

  • luxguns@gmail.com

  • Du mardi au vendredi : de 9h à 12h et de 13h30 à 18h (samedi 17h)

* Au Luxembourg la vente d’armes, la vente de munition ainsi que d’articles de rechargement est réglementée juridiquement et accessible à partir de 18 ans.

ULTIMAK AK-47 Scope Mount Model M1-B

178.9 taxe incluse

N° Article : 100000497

Rupture de stock

Vous souhaitez être averti lorsque ce produit sera de nouveau en stock ?

Low Mount Lets You Use Optics Or Iron Sights

A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail.  Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.

SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.

Lire plus